Nick Stone Nick Stone's Profile Page

Nick Stone Nick Stone

0 Course Enrolled • 0 Course Completed

Biography

Pure Storage FlashArray-Implementation-Specialist Training For Exam | FlashArray-Implementation-Specialist Latest Exam Test

DOWNLOAD the newest PracticeVCE FlashArray-Implementation-Specialist PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1gvyB1H5LwNlcdWIznJcHRBE30Evy4F2_

Our FlashArray-Implementation-Specialist study materials can help you pass the exam faster and take the certificate you want. Then you will have one more chip to get a good job. Our FlashArray-Implementation-Specialist study materials allow you to stand at a higher starting point, pass the FlashArray-Implementation-Specialist exam one step faster than others, and take advantage of opportunities faster than others. You know, your time is very precious in this fast-paced society. If you only rely on one person's strength, it is difficult for you to gain an advantage. Our FlashArray-Implementation-Specialist learning questions will be your most satisfied assistant.

Pure Storage FlashArray-Implementation-Specialist Exam Syllabus Topics:

Topic
Details

Topic 1

Upgrades: This section of the exam measures the skills of FlashArray Implementation Specialists and focuses on tasks involved in managing firmware and software upgrades. Candidates must demonstrate knowledge of upgrade planning, verification steps, and rollback procedures, ensuring that systems are updated with minimal disruption to service.

Topic 2

Post-Installation
Upgrade: This section of the exam measures the skills of FlashArray Implementation Specialists and evaluates how professionals confirm system functionality after installation or an upgrade. It involves validating connectivity, running health checks, confirming configurations, and ensuring that the deployment meets operational expectations.

Topic 3

Pre-Installation
Upgrade: This section of the exam measures the skills of Enterprise Infrastructure Technicians and covers all preparation activities before deploying or upgrading a Pure Storage FlashArray. It includes understanding environmental requirements, verifying prerequisites, checking compatibility, and validating system readiness through appropriate tools and documentation.

Topic 4

Installation: This section of the exam measures the skills of Enterprise Infrastructure Technicians and focuses on executing a successful installation of FlashArray systems. It tests the ability to perform physical setup, cabling, configuration of network settings, and the application of initial system configurations necessary for full deployment.

>> Pure Storage FlashArray-Implementation-Specialist Training For Exam <<

FlashArray-Implementation-Specialist Latest Exam Test & FlashArray-Implementation-Specialist Reliable Test Prep

The Pure Storage FlashArray-Implementation-Specialist online exam is the best way to prepare for the Pure Storage FlashArray-Implementation-Specialist exam. PracticeVCE has a huge selection of FlashArray-Implementation-Specialist dumps and topics that you can choose from. The FlashArray-Implementation-Specialist Exam Questions are categorized into specific areas, letting you focus on the Pure Storage FlashArray-Implementation-Specialist subject areas you need to work on.

Pure Storage Certified FlashArray Implementation Specialist Sample Questions (Q51-Q56):

NEW QUESTION # 51
Which PCIe slot must be used for a SAS HBA on R4B revision controllers?

A. PCIe slot 0
B. PCIe slot 1
C. PCIe slot 4

Answer: B

Explanation:
While modern FlashArrays (like the XR4 and XL series) primarily use NVMe-oF/RoCE for backend connectivity, specific configurations or legacy support scenarios may still require a SAS HBA (Serial Attached SCSI Host Bus Adapter), for example, when connecting to older SAS-based expansion shelves during a migration or hybrid configuration.
For R4B revision controllers (a specific hardware revision of the Gen 4 controller), the strict hardware addressing map requires that any SAS HBA be installed in PCIe Slot 1.
Slot 1 provides the specific PCIe lane routing and BIOS interrupts required for the legacy SAS controller to be recognized and function without conflicting with the native NVMe fabric.
Installing the card in Slot 0 (typically reserved for RoCE/Ethernet backend) or Slot 4 would likely result in the card being ignored by Purity or causing boot errors due to resource conflict.

NEW QUESTION # 52
An Implementation Engineer is installing the first DirectFlash Shelf (DFS) on a FlashArray//XR4 controller. Which ports should the Implementation Engineer use for the connection?

A. ETH 18/19
B. ETH 0/1
C. ETH 10/11

Answer: A

Explanation:
The FlashArray//XR4 utilizes onboard 100GbE RoCE (RDMA over Converged Ethernet) ports for connecting to the first loop of DirectFlash Shelves, removing the need for dedicated PCIe add-in cards for the base configuration. The port mapping for these onboard backend ports differs from previous generations.
On the //XR4 controller chassis, the specific Ethernet interfaces designated for the first DirectFlash Shelf loop are typically the high-numbered onboard ports. In this specific exam context and hardware revision, ETH 18 and ETH 19 are identified as the correct primary backend connectivity ports .
Implementation Engineers must connect the QSFP28 cables from the "uplink" ports on the first shelf (IOM0 and IOM1) to ETH18 and ETH19 on the controllers (CT0 and CT1) respectively. Using incorrect ports (like ETH0/1, which are management) would result in the shelf not being detected by the storage fabric.
=========

NEW QUESTION # 53
What command should the Implementation Engineer run to configure a proxy?

A. puresetup proxy https://yourproxyserver:1234
B. purearray configure --proxy url https://example.proxy.server
C. purearray setattr --proxy https://yourproxyserver:1234

Answer: C

Explanation:
FlashArrays require outbound HTTPS connectivity to reach Pure1 for log uploads, phone home, and remote assist. In many enterprise environments, direct internet access is blocked, and traffic must be routed through an HTTP/HTTPS proxy.
To configure this setting in Purity via the CLI, the correct command is purearray setattr --proxy followed by the full proxy URL (including protocol and port). The setattr (set attribute) subcommand is the standard method for modifying array-wide configuration parameters like the array name, idle timeout, and proxy settings. The other command variations (puresetup proxy or purearray configure) are incorrect syntax for this specific operation. This configuration is often a critical step during the "Pre-Flight" or initial setup phase to ensure the array can "phone home" immediately upon deployment.
=========

NEW QUESTION # 54
A customer has a FlashArray X20R3 with 22/22 data packs in the chassis at 80% space usage and wishes to swap one of the data packs for a 45TB pack. What step needs to be taken to facilitate this consolidation?

A. Send a DirectFlash Shelf with a 63TB of temporary extra capacity.
B. Reduce array space usage to allow for the evacuation of the 22TB packs.
C. Send a DirectFlash Shelf without any additional capacity.

Answer: A

Explanation:
Adding a DirectFlash Shelf with sufficient temporary extra capacity (63TB) allows data to be evacuated from the smaller 22TB packs during the swap, enabling consolidation without reducing array usage beforehand.

NEW QUESTION # 55
A FlashArray//XR2/3 has an Ethernet mezzanine (EMEZZ), what are the interface names of the ports on the mezzanine?

A. ETH8, ETH9, ETH10, and ETH11
B. ETH10, ETH11, ETH12, and ETH13
C. ETH6, ETH7, ETH8, and ETH9

Answer: A

Explanation:
The Ethernet mezzanine on FlashArray//XR2/3 is assigned interfaces starting at ETH8 through ETH11, reflecting the numbering scheme for additional Ethernet ports beyond the base interfaces.

NEW QUESTION # 56
......

If you prepare well in advance, you’ll be stress-free on the Pure Storage Certified FlashArray Implementation Specialist FlashArray-Implementation-Specialist exam day and thus perform well. Candidates can know where they stand by attempting the Pure Storage FlashArray-Implementation-Specialist practice test. It can save you lots of time and money. The question on the Pure Storage FlashArray-Implementation-Specialist Practice Test is quite similar to the Pure Storage FlashArray-Implementation-Specialist questions that get asked on the FlashArray-Implementation-Specialist exam day.

FlashArray-Implementation-Specialist Latest Exam Test: https://www.practicevce.com/Pure-Storage/FlashArray-Implementation-Specialist-practice-exam-dumps.html

DOWNLOAD the newest PracticeVCE FlashArray-Implementation-Specialist PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1gvyB1H5LwNlcdWIznJcHRBE30Evy4F2_